|Tax Status:||Tax Paid|
Newcastle upon Tyne Tyne & Wear UK
|Website:||Open website in new window|
As with all boats built by Colvic Craft, the Colvic Seaworker is well built, seaworthy and designed to keep you safe in the most challenging conditions. Heavy displacement hull with a flared bow and raised foredeck make for a dry ride with minimal spray. Deep safe cockpit with will fish 4-6 in comfort. Forward cuddy with a couple of berths or a decent storage area. Single BMC 2.2L inboard with 3 bladed bronze propeller. This is not a quick boat but she is economical to run. Comes with a DSC VHF, Garmin GPS and Garmin colour depth/fishfinder. Aft cockpit mooring cover keeps the boat clean and dry.
The wheelhouse is entered from the cockpit on the port side. Inside the wheelhouse is a mixture of stained wood panels and carpeting. large glazed windows allow great visibility.
There is a cuddy "cabin" with two settee bench berths with storage below. Large roof hatch for ventilation.
Garmin Fishfinder 400C colour sounder
Garmin GPS 152
GME GR100 radio
Anchor with chain and warp
Electric bilge pump
Warps & fenders
Flag staff with ensign
GRP constructed fishing boat with raised flared bow giving a dry comfortable ride.
Blue and white topsides in excellent condition.
Underwater areas antifouled in March 2019 ready for the season.
Wide cockpit coamings provide security when fishing in a swell.
Raised foredeck finished in non slip. Aluminium bow fitting with a roller.
Houdini hatch allows the anchor to be deployed in rough weather.
Stainless steel bow rails. Foredeck mooring cleat and anchor post. Midship and aft cleats.
Cockpit finished in grey deck paint with rubber nonslip panels.
Grab rails and boarding ladder for safety. Storage panels at the transom with access to the steering gear.
The engine is mid-mounted with large engine housing. This doubles as a gutting table or handy seat.
Wheelhouse with aluminium framed glazing. Handrails on the roof.
Wheelhouse door on the port side with lock. Cockpit cover.
Engine & Electrics:
Vessel powered by a well maintained BMC 2.2, 50hp engine.
This 4 cylinder, inboard diesel is in great shape and serviced annually. March 2019
Engine housed midships with reduction gearbox driving a 3-bladed bronze propeller.
Single lever engine control at the helm with instrumentation including rev counter, oil pressure, and temperature.
Helm position on the starboard side with pedestal seat and spoked wheel.
12V system with a single, heavy duty 105amph, battery providing engine start and nav aid power.
The battery is recharged via the engine alternator.
|No. of engines:||1|
|Engine model:||BMC 2.2|
|Length over all:||21'|
|Length at waterline:||19'|
|Hull material:||Glass Fibre|